ZyXEL p-662h-61 Guia Do Utilizador

Prestige 662HW Series User’s Guide

405

Chapter 40 Firmware and Configuration File Maintenance

Figure 250   Successful Restoration Confirmation Screen

This section shows you how to upload firmware and configuration files.  You can upload 
configuration files by following the procedure in

or by 

following the instructions in Menu 24.7.2 – System Maintenance – Upload System 
Configuration File.

FTP is the preferred method for uploading the firmware and configuration. To use this feature, 
your computer must have an FTP client. 

When you telnet into the Prestige, you will see the following screens for uploading firmware 
and the configuration file using FTP.

Figure 251   Telnet Into Menu 24.7.1 Upload System Firmware 

You see the following screen when you telnet into menu 24.7.2.

Save to ROM

Hit any key to start system reboot.

Note: Do not interrupt the file transfer process as this may PERMANENTLY 
DAMAGE YOUR Prestige. 

Menu 24.7.1 - System Maintenance - Upload System Firmware

To upload the system firmware, follow the procedure below:

  1. Launch the FTP client on your workstation.

  2. Type "open" and the IP address of your system. Then type "root" and

     SMT password as requested.

  3. Type "put firmware filename ras" where "firmwarefilename" is the name

     of your firmware upgrade file on your workstation and "ras" is the

     remote file name on the system.

  4. The system reboots automatically after a successful firmware upload.

For details on FTP commands, please consult the documentation of your FTP

client program. For details on uploading system firmware using TFTP (note

that you must remain on this menu to upload system firmware using TFTP),

please see your manual.

Press ENTER to Exit: