ZyXEL p-662h-61 Guia Do Utilizador

Prestige 662HW Series User’s Guide

Chapter 40 Firmware and Configuration File Maintenance

406

Figure 252   Telnet Into Menu 24.7.2 System Maintenance 

To upload the firmware and the configuration file, follow these examples

1 Launch the FTP client on your computer.

2 Enter “

open

”, followed by a space and the IP address of your Prestige.  

3 Press [ENTER] when prompted for a username.

4 Enter your password as requested (the default is “1234”).

5 Enter “

bin

” to set transfer mode to binary.

6 Use “

put

” to transfer files from the computer to the Prestige, for example, “

put 

firmware.bin ras

” transfers the firmware on your computer (firmware.bin) to the 

Prestige and renames it “

ras

”. Similarly, “

put config.rom rom-0

” transfers the 

configuration file on your computer (config.rom) to the Prestige and renames it “

rom-0

”. 

Likewise “

get rom-0 config.rom

” transfers the configuration file on the Prestige to 

your computer and renames it “

config.rom

.” See earlier in this chapter for more 

information on filename conventions.

7 Enter “

quit

” to exit the ftp prompt.

The Prestige automatically restarts after a successful file upload.

Menu 24.7.2 - System Maintenance - Upload System Configuration File

To upload the system configuration file, follow the procedure below:

  1. Launch the FTP client on your workstation.

  2. Type "open" and the IP address of your system. Then type "root" and

     SMT password as requested.

  3. Type "put configuration filename rom-0" where "configurationfilename"

     is the name of your system configuration file on your workstation, which

     will be transferred to the "rom-0" file on the system.

  4. The system reboots automatically after the upload system configuration

     file process is complete.

For details on FTP commands, please consult the documentation of your FTP

client program. For details on uploading system firmware using TFTP (note

that you must remain on this menu to upload system firmware using TFTP),

please see your manual.

Press ENTER to Exit: