ZyXEL g-2000 plusv2 Guia Do Utilizador
ZyXEL G-2000 Plus v2 User’s Guide
168
Chapter 13 Remote Management Screens
3 The IP address in the Secured Client IP field does not match the client IP address. If it
does not match, the ZyXEL device will disconnect the session immediately.
4 There is already another remote management session with an equal or higher priority
running. You may only have one remote management session running at one time.
5 There is a firewall rule that blocks it.
13.1.2 Remote Management and NAT
When NAT is enabled:
• Use the ZyXEL device’s WAN IP address when configuring from the WAN.
• Use the ZyXEL device’s LAN IP address when configuring from the LAN.
• Use the ZyXEL device’s LAN IP address when configuring from the LAN.
13.1.3 System Timeout
There is a default system management idle timeout of five minutes (three hundred seconds).
The ZyXEL device automatically logs you out if the management session remains idle for
longer than this timeout period. The management session does not time out when a statistics
screen is polling. You can change the timeout period in the System screen
The ZyXEL device automatically logs you out if the management session remains idle for
longer than this timeout period. The management session does not time out when a statistics
screen is polling. You can change the timeout period in the System screen
13.2 Configuring WWW
To change your ZyXEL device’s World Wide Web settings, click REMOTE MGMT to
display the WWW screen.
display the WWW screen.