ZyXEL g-2000 plusv2 Guia Do Utilizador

ZyXEL G-2000 Plus v2 User’s Guide

Chapter 13 Remote Management Screens

169

Figure 67   Remote Management: WWW

The following table describes the labels in this screen.

You can configure your ZyXEL device for remote Telnet access as shown next. The 
administrator uses Telnet from a computer on a remote network to access the ZyXEL device.

Table 55   Remote Management: WWW

Server Port

You may change the server port number for a service if needed, however you must 

use the same port number in order to use that service for remote management.

Server Access

Select the interface(s) through which a computer may access the ZyXEL device 

using this service.

Secured Client IP 

Address

A secured client is a “trusted” computer that is allowed to communicate with the 

ZyXEL device using this service. 
Select All to allow any computer to access the ZyXEL device using this service.
Choose Selected to just allow the computer with the IP address that you specify to 

access the ZyXEL device using this service.

Apply

Click Apply to save your customized settings and exit this screen. 

Reset

Click Reset to begin configuring this screen afresh.