ZyXEL g-2000 plusv2 Guia Do Utilizador

ZyXEL G-2000 Plus v2 User’s Guide

Chapter 33 Firmware and Configuration File Maintenance

337

1 Launch the FTP client on your computer.

2 Enter “open” and the IP address of your ZyXEL device.  

3 Press [ENTER] when prompted for a username.

4 Enter “root” and your SMT password as requested. The default is 1234.

5 Enter “bin” to set transfer mode to binary.

6 Use “get” to transfer files from the ZyXEL device to the computer, for example, “get 

rom-0 config.rom” transfers the configuration file on the ZyXEL device to your computer 
and renames it “config.rom”. See earlier in this chapter for more information on filename 
conventions.

7 Enter “quit” to exit the FTP prompt.

                                                                                                                                                            
Menu 24.5 – Backup Configuration

To transfer the configuration file to your workstation, follow the 
procedure below:

1. Launch the FTP client on your workstation.
2. Type "open" and the IP address of your router. Then type "root" and
   SMT password as requested.
3. Locate the ‘rom-0’ file.
4. Type ‘get rom-0’ to back up the current router configuration to your 
workstation.

For details on FTP commands, please consult the documentation of your FTP
client program. For details on backup using TFTP (note that you must remain 
in the menu to back up using TFTP), please see your router manual.

                                  Press ENTER to Exit: