ZyXEL g-2000 plusv2 Guia Do Utilizador

ZyXEL G-2000 Plus v2 User’s Guide

338

Chapter 33 Firmware and Configuration File Maintenance

Figure 190 FTP Session Example

33.2.3 GUI-based FTP Clients

The following table describes some of the commands that you may see in third party FTP
clients.

33.2.4 TFTP and FTP over WAN Management Limitations

TFTP, FTP and Telnet over WAN will not work when:

1 You have disabled Telnet service in menu 24.11.

2 You have applied a filter in menu 3.1 (LAN) or in menu 11.5 (WAN) to block Telnet

service.

3 The IP address in the Secured Client IP field in menu 24.11 does not match the client IP.

If it does not match, the ZyXEL device will disconnect the Telnet session immediately.

4 You have an SMT console session running.

331 Enter PASS command
Password:
230 Logged in
ftp> bin
200 Type I OK
ftp> get rom-0 zyxel.rom
200 Port command okay
150 Opening data connection for STOR ras
226 File received OK
ftp: 16384 bytes sent in 1.10Seconds
297.89Kbytes/sec.
ftp> quit

Table 121 General Commands for Third Party FTP Clients

COMMAND

DESCRIPTION

Host Address

Enter the address of the host server.

Anonymous.
This is when a user I.D. and password is automatically supplied to the server for

anonymous access. Anonymous logins will work only if your ISP or service

administrator has enabled this option.
Normal.
The server requires a unique User ID and Password to login.

Transfer Type

Transfer files in either ASCII (plain text format) or in binary mode.

Initial Remote