ZyXEL g-2000 plusv2 Guia Do Utilizador

ZyXEL G-2000 Plus v2 User’s Guide

340

Chapter 33 Firmware and Configuration File Maintenance

The following table describes some of the fields that you may see in third party TFTP clients.

Menu 24.6 –- System Maintenance – Restore Configuration allows you to restore the 
configuration via FTP or TFTP to your ZyXEL device. The preferred method is FTP. Note 
that this function erases the current configuration before restoring the previous backup 
configuration; please do not attempt to restore unless you have a backup configuration stored 
on disk. To restore configuration using FTP or TFTP is the same as uploading the 
configuration file, please refer to the following sections on FTP and TFTP file transfer for 
more details. The ZyXEL device restarts automatically after the file transfer is complete.

For details about backup using (T)FTP please refer to earlier sections on FTP and TFTP file 
upload in this chapter.

Table 122    General Commands for Third Party TFTP Clients

Host

Enter the IP address of the ZyXEL device. 192.168.1.2 is the ZyXEL device’s 

default IP address when shipped.

Send/Fetch

Use “Send” to upload the file to the ZyXEL device and “Fetch” to back up the file 

on your computer. 

Local File

Enter the path and name of the firmware file (*.bin extension) or configuration 

file (*.rom extension) on your computer.

Remote File

This is the filename on the ZyXEL device. The filename for the firmware is “ras” 

and for the configuration file, is “rom-0”.

Binary

Transfer the file in binary mode.

Abort

Stop transfer of the file.