ZyXEL g-2000 plusv2 Guia Do Utilizador

ZyXEL G-2000 Plus v2 User’s Guide

38

Chapter 1 Getting to Know Your Device

The LAN interface automatically adjusts to either a crossover or straight-through Ethernet 
cable.

The 10/100 Mbps Ethernet WAN port attaches to the Internet via broadband DSL/Cable 
modem. 

The ZyXEL device reset button is built into the side panel. Use this button to restore the 
factory default password to 1234; IP address to 192.168.1.1, subnet mask to 255.255.255.0 
and DHCP server enabled with a pool of 32 IP addresses starting at 192.168.1.33. 

The blue ZyAIR LED (also known as the breathing LED) is on when the ZyXEL device is on 
and blinks (or breaths) when data is being transmitted to/from its wireless stations. You may 
use the web configurator to turn this LED off even when the ZyXEL device is on and data is 
being transmitted/received.

The ZyXEL device has a built-in RADIUS server that can authenticate wireless clients or 
other APs in other wireless networks.The ZyXEL device can also function as an AP and as a 
RADIUS server at the same time.

Wi-Fi Protected Access (WPA) is a subset of the IEEE 802.11i standard. WPA2 (IEEE 
802.11i) is a wireless security standard that defines stronger encryption, authentication and 
key management than WPA. 

Key differences between WPA(2) and WEP are improved data encryption and user 
authentication.

The ZyXEL device complies with the IEEE 802.11b wireless standards.