Sharp MX-2300N Guia Do Utilizador

• When placing the original, orient it as explained below.

* To place a large portrait-oriented original, place it as shown above in "Landscape orientation" and specify the 

placement orientation in step 5.

• Place 5-1/2" x 8-1/2" (A5) size originals in portrait (vertical) orientation (

).

If placed in landscape (horizontal) orientation (

), an incorrect size will be detected. For an 5-1/2" x 8-1/2"R (A5R) 

size original, enter the original size manually.

• Originals cannot be scanned in succession from both the automatic document feeder and the document glass and 

sent in a single transmission.

Do not place any objects under the original size detector. Closing the automatic document feeder with an object 
underneath may damage the original size detector plate and prevent correct detection of the document size.

• When scanning to USB memory, there is no need to specify the destination.

• If a destination of another mode has been previously specified, a message will appear when you change to USB 

memory mode indicating that the destination setting will be cleared. Touch the [OK] key in the message screen and 
go to the next step.

1

1

Original size
detector

1

1

1

1

1

1

Place the originals face up.

Place the original face down and align the 
corner with the tip of the arrow mark 

 in the 

top left corner of the document glass scale.

Portrait orientation*

Landscape orientation

Quick File

File

Special Modes

Address Entry

Address Book

Fax

Data Entry

PC Scan

USB Mem. Scan

Internet Fax

Scan

Mode Switch

Send Settings

Image

Settings