Vertical ip2007 Cartão De Referência Rápida
LED
Color
Status
Description
Message
Indicator
Indicator
Off
No new message
RED
Flashing New voice
message indication
1,2,3,4
VoIP Line
Keys
VoIP Line
Keys
Off
No active line,
phone is on-hook
phone is on-hook
GREEN
Steady
Line is active when
dialing, or during a
call
dialing, or during a
call
Flashing Incoming call while
you are engaged in
another call
another call
Speaker Key
Off
Speaker is not in
use
use
GREEN
Steady
While in on-hook
dialing mode or
hands-free mode
dialing mode or
hands-free mode
MUTE Key
Off Microphone
is
active
RED
Steady
Microphone is
inactive
inactive
Headset Key
Off
Headset is not in
use
use
GREEN
Steady
While in on-hook
dialing mode or
hands-free mode
and headset
dialing mode or
hands-free mode
and headset
All LEDs for
system status
system status
Off In
normal
operation mode
GREEN
Steady
During system
boot
boot
Flashing When system boot
fails, or a critical
error occurs
error occurs
LED Status for IP Phone
No.
Item
Description
1
Reset
Button resets your IP phone to
the factory default settings.
the factory default settings.
2
Link/ACT
LEDs indicate link/activity status
of WAN and LAN ports.
of WAN and LAN ports.
3
WAN Port
RJ-45 Jack 100/10Mbps Ethernet
port for connecting to IP network.
port for connecting to IP network.
4
LAN Port
RJ-45 Jack 100/10Mbps Ethernet
port for connecting to PC or
Notebook.
port for connecting to PC or
Notebook.
5
Power Jack
If a power source from an
adaptor is required, use the
standard power adaptor provided
(5VDC/2000mA).
adaptor is required, use the
standard power adaptor provided
(5VDC/2000mA).
6
Power Source
(optional)
(optional)
This switch is only available on
phone models supporting PoE.
There are two available sources
for power:
phone models supporting PoE.
There are two available sources
for power:
- Power Adaptor
- PoE (Power over Ethernet)
- PoE (Power over Ethernet)
Set to the appropriate option
before installing your IP Phone.
Default setting = Power Adaptor
NOTE: Only the Ethernet WAN
port supports PoE.
before installing your IP Phone.
Default setting = Power Adaptor
NOTE: Only the Ethernet WAN
port supports PoE.
IP Phone Connections
1
2
3
4
5
6
P/N: 7551-00
Published: March 2007
Function
Operation
Making
a call
1. Pick up the handset.
You will hear a dial tone.
You will hear a dial tone.
2. Use the keypad to dial
a phone number.
a phone number.
NOTE: To delete the last
digit entered, use the
“Backsp” softkey.
digit entered, use the
“Backsp” softkey.
3. Hang up the handset to
end the conversation.
end the conversation.
Receiving
a call
1. Pick up the handset
when the phone rings.
when the phone rings.
2. Hang up the handset to
end the conversation.
end the conversation.
Calling last
number dialed
1. Pick up the handset.
2. Press the REDIAL key.
The last number dialed will
automatically be redialed.
The last number dialed will
automatically be redialed.
Transferring
a call
(Blind Transfer)
1. During a conversation,
press the TRANSFER key.
press the TRANSFER key.
2. Use the keypad to dial
the desired phone number.
the desired phone number.
3. The call will transfer
automatically; hang up the
handset.
automatically; hang up the
handset.
Adjusting
voice volume
During a conversation …
if the volume is too low or
too high, press the
VOLUME CONTROL key to
adjust softness/loudness.
too high, press the
VOLUME CONTROL key to
adjust softness/loudness.
Muting the
microphone
1. During a conversation,
press the MUTE key to
prevent other party from
hearing other discussions.
press the MUTE key to
prevent other party from
hearing other discussions.
2. Press the MUTE key
again to re-establish a
two-way conversation.
again to re-establish a
two-way conversation.
Basic Call Features
-