Vertical ip2007 Guia Do Utilizador
Wireless Settings
5-21
Chapter 5 - Xcelerator IP Configuration
Xcelerator IP Administrator Manual
March 2007
Wireless - Bridge Parameters
The Wireless Bridge will allow you to configure the wireless bridge features of the wireless
LAN interface. You can select Wireless Bridge (also known as Wireless Distribution
System) to disable access point functionality.
- Selecting
- Selecting
Access Point enables access point functionality. Wireless bridge
functionality will still be available, and allow wireless stations to associate to the AP.
- Selecting
Disabled in "Bridge Restrict" will disable the wireless bridge restriction,
allowing any wireless bridge to be granted access.
- Selecting
Enabled or Enabled (Scan) enables wireless bridge restriction. Only those
bridges defined in Remote Bridges will be granted access.
Wireless - Advanced Parameters
The Wireless Advanced settings allow you to configure more advanced features of the
wireless LAN interface. You can select a particular channel on which to operate, force the
transmission rate to a particular speed, set the fragmentation threshold, set the RTS
threshold, set the wakeup interval for clients in power-save mode, set the beacon interval
for the access point, set XPress mode and set whether short or long preambles are used.
Channel -- Select the appropriate channel from the list provided to correspond with
your network settings. All devices in your wireless network must use the same
channel in order to function correctly.
Rate -- The default setting is Auto. The range is from 1 to 54Mbps. The rate of data
Rate -- The default setting is Auto. The range is from 1 to 54Mbps. The rate of data
transmission should be set depending on the speed of your wireless network. You can
select from one transmission speed, or keep the default setting, Auto, to have the
Xcelerator IP automatically use the fastest possible data rate.
Multicast Rate -- The default setting is 54Mbps. The range is from 1 to 54Mbps. The
Multicast Rate -- The default setting is 54Mbps. The range is from 1 to 54Mbps. The
rate of data transmission should be set depending on the speed of your wireless
network. You can select from one transmission speed, or keep the default setting, to
have the Xcelerator IP automatically use the fastest data rate for multicast packets.
Basic Rate -- Select the basic rate that wireless clients must support.
Basic Rate -- Select the basic rate that wireless clients must support.