Viking Range ddoe305t Manual Do Utilizador
23
Tones
(cont.)
To change the frequency and/or duration of any of the above tone
signals:
1. Press “SETTINGS.” Settings menu will appear in display.
2. Press the up or down arrows until “TONES…” appears in the
signals:
1. Press “SETTINGS.” Settings menu will appear in display.
2. Press the up or down arrows until “TONES…” appears in the
display.
3. Press “ENTER,” and “RESTORE FACTORY DEFAULTS: NO”
appears on the display.
4. Scroll up or down using the arrow keys to find the Tone you would
like to change and press “ENTER.” Display will flash and appear as
follows:
follows:
5. Press “ENTER,” and the “1 x 1 SEC” value will flash.
6. Using the numeric keyboard, enter the number and the duration of
6. Using the numeric keyboard, enter the number and the duration of
tones desired. The number of tones can be a value from 0 to 9. The
duration of tones is measured in tenths of a second. You can enter a
number from 0.0 to 9.0.
duration of tones is measured in tenths of a second. You can enter a
number from 0.0 to 9.0.
7. Press “ENTER” when finished. The tone is customized to your
preference. At this point the oven plays the new tone. If you do not
like it, return to Step 1 to adjust the tone.
like it, return to Step 1 to adjust the tone.
8. To exit the settings menu, press “SETTINGS.”
Oven Settings
P
ro
d
u
ct
C
o
n
tr
o
ls
22
Tones
This function allows you to define the duration of tones and the
number of tones for different events. Your oven is programmed with
different audible tones as demonstrated by the following chart:
number of tones for different events. Your oven is programmed with
different audible tones as demonstrated by the following chart:
Oven Settings
P
ro
d
u
ct
C
o
n
tr
o
ls
Description
of tone
Used in…
Number
of tones
of tones
Duration
(seconds)
1 Minute Left
Min/Sec or Cook Timer
1
1
Autostart
Cooking mode or
timer starts without
pressing Set or Enter
timer starts without
pressing Set or Enter
2
0.1
End of Hold
Cook Time/Stop Time
4
1
Timer Expired
Min/Sec or Cook Timer
3
1
Failure
RTD error/Latch error
5
1
Invalid Entry
Error in programming
3
0.1
Periodic Reminder
After cooking mode
finishes or during
programming to
prompt action by user
finishes or during
programming to
prompt action by user
1
0.1
Key Press
Information Entry
1
0.1
Invalid Key
Information Entry
3
0.1
Repeat Key
Information Entry
0
0
Oven Light Off
Turning light off
2
0.1
Oven Light On
Turning light on
1
0.1
Panel is Locked
Information Entry
3
0.1
Setpoint Reached
Cooking Modes
1
1
Meat Probe
Roasting Modes
3
1
Meat Probe within 10°
Roasting Modes
2
1
Searing Time Reached
Roasting Modes
3
1
Start Time Reached
Various Cooking Modes
1
1
Panel is Unlocked
Information Entry
2
0.1
“Short Key Entry: 5 sec”
Timeout
Name
Duration of
Timeout