Viking Range dccg1304bss Instrução De Instalação
18
19
1
2
Reattach door to range.
Open door completely. Reattach hinge trim on both
sides.
3
4
Remove pins from holes in hinges.
Close door.
5
If the door needs to be adjusted, loosen hinge trim screws
located in step 2. Adjust the screws located between the
door and kickplate using a 5/32” hex head Allen wrench.
door and kickplate using a 5/32” hex head Allen wrench.
After adjustment, tighten hinge trim screws.
Door Replacement and Adjustment
1
2
3/
8”
3/8”
(0.
95
cm
)
(0.95 cm)
3/
8”
(0.
95
cm
)
3
Burner heads and burner caps are packed in the
cardboard top pack with the grates. Align burner head
on burner base. Place burner cap on burner head.
Place grate onto the burner pan.
Check that unit is level side to side
and front to back. The side trim must be 3/8” (0.95 cm)
above countertop. If unit is not level repeat steps 5-7
of “Leveling/Adjustments/Alignment” section.
Slide range into place. Be sure
anti-tip bracket slides into the anti-tip opening.
Final Installation