Viking Range detu200-4b Guia Do Utilizador
13
Surface Operation
O
p
e
ra
tio
n
Touch Control Detail
• “-” key decreases power level.
• “+” key increases power level.
• “ON/OFF” key selects or cancels the
• “+” key increases power level.
• “ON/OFF” key selects or cancels the
zone.
• The LED (Light Emitting Diode) power
indicator arc indicates power levels
from “sim” to “hi”. In the center are
LED indicators for dual and triple
zones (if applicable).
from “sim” to “hi”. In the center are
LED indicators for dual and triple
zones (if applicable).
Hot Surface Indicator Lights
Each element has a HOT SURFACE indicator light to
show when the cooking area is hot. This indication
turns on when the zone is activated and remains ON
until the cooking area has cooled down to a “safe to
touch” temperature (approximately 150°F). If a hot
surface light is ON use caution when working around
the cooktop as it is still hot.
show when the cooking area is hot. This indication
turns on when the zone is activated and remains ON
until the cooking area has cooled down to a “safe to
touch” temperature (approximately 150°F). If a hot
surface light is ON use caution when working around
the cooktop as it is still hot.
Power Supply
When the cooktop is connected to the power supply all lights and
digits turn on to indicate a proper activation. This operation is
completed after a few seconds and the control turns off automatically.
Now the cooktop is ready for operation.
digits turn on to indicate a proper activation. This operation is
completed after a few seconds and the control turns off automatically.
Now the cooktop is ready for operation.
Key Lock Function
The key lock function is activated or deactivated by holding the
“LOCK” key for 2 seconds. When the lock indication turns on, the
keyboard is locked. The keys are automatically locked at start-up. The
locking function can be activated regardless of the heaters condition
(working or not). The lock function locks all the keys but the
“ON/OFF” ones. The control locks itself automatically if it is not in use
for 1 minute.
“LOCK” key for 2 seconds. When the lock indication turns on, the
keyboard is locked. The keys are automatically locked at start-up. The
locking function can be activated regardless of the heaters condition
(working or not). The lock function locks all the keys but the
“ON/OFF” ones. The control locks itself automatically if it is not in use
for 1 minute.
Activating Elements
Hold the “LOCK” key in case the commands are locked (see that the
lock LED is on and turns off after a few seconds). Touch and hold the
proper “ON/OFF” key for two seconds in order to select the desired
zone. The “hi” LED indication starts flashing, waiting for user input.
lock LED is on and turns off after a few seconds). Touch and hold the
proper “ON/OFF” key for two seconds in order to select the desired
zone. The “hi” LED indication starts flashing, waiting for user input.
The power level must be set within 10 seconds, otherwise the element
remains off. Touch the “-” or “+” keys to change and eventually set
the power level. The preset value is level 6.
remains off. Touch the “-” or “+” keys to change and eventually set
the power level. The preset value is level 6.