Lexmark T656dne Guia Do Utilizador

Shows the assigned NetWare print mode
Note: This can be changed only from the Embedded Web Server.

Shows the assigned NetWare network number
Note: This can be changed only from the Embedded Web Server.

Ethernet 802.2
Ethernet 802.3
Ethernet Type II
Ethernet SNAP

Enables the Ethernet frame type setting
Note: On is the factory default setting for all menu items.

Yes
No

Reduces network traffic by allowing the transfer and acknowledgement of

multiple data packets to and from the NetWare server
Note: Yes is the factory default setting.

Yes
No

Specifies the NSQ/GSQ Mode setting
Note: No is the factory default setting.

This menu is available from the Network/Ports menu:
Network/Ports ª Standard Network or Network <x> ª Standard Network Setup or Network <x> Setup ª

On
Off

Activates LexLink support
Note: Off is the factory default setting.

Shows the assigned LexLink nickname
Note: The LexLink nickname can be changed only from the Embedded Web

Server.

On
Off

Sets the printer to automatically switch to PCL emulation when a print job received

through a USB port requires it, regardless of the default printer language
Notes:

On is the factory default setting.

When the Off setting is used, the printer does not examine incoming data.

When the Off setting is used, the printer uses PostScript emulation if the PS

SmartSwitch setting is On. It uses the default printer language specified in the

Setup menu if the PS SmartSwitch setting is Off.

Understanding printer menus