Lexmark T656dne Guia Do Utilizador

ENA Address
ENA Netmask
ENA Gateway

Sets the network address, netmask, or gateway information for an external print

server that is attached to the printer using a USB cable.
Note: This menu item is available only if the printer is attached to an external print

server through the USB port.

This menu appears only if an optional parallel card is installed.

On
Off

Sets the printer to automatically switch to PCL emulation when a print job received

through a parallel port requires it, regardless of the default printer language
Notes:

On is the factory default setting.

When the Off setting is used, the printer does not examine incoming data.

When the Off setting is used, the printer uses PostScript emulation if PS

SmartSwitch is set to On. It uses the default printer language specified in the

Setup menu if PS SmartSwitch is set to Off.

On
Off

Sets the printer to automatically switch to PS emulation when a print job received

through a parallel port requires it, regardless of the default printer language
Notes:

On is the factory default setting.

When the Off setting is used, the printer does not examine incoming data.

When the Off setting is used, the printer uses PCL emulation if PCL SmartSwitch

is set to On. It uses the default printer language specified in the Setup menu if

PCL SmartSwitch is set to Off.

On
Off
Auto

Sets the printer to perform the special processing required for bidirectional

communication following the conventions defined by the NPA protocol
Notes:

Auto is the factory default setting.

Changing this setting from the printer control panel and then exiting the menus

causes the printer to restart. The menu selection is updated.

Understanding printer menus