VIZIO E320VP Guia Do Utilizador

VIZIO E320VP User Manual 

Version 6/15/2010 

43 

www.VIZIO.com 

antenna around the room or close to a window. 

 

Check the video settings of your external device. 

 

Check video/device cable integrity. Try another cable (HDMI, AV/Composite, 
Coax etc.) 

 

Try the device on another input. 

 

Perform a power cycle by removing the AC power cable from the back of your 
television for 30 seconds. Reinsert the power cable and power on the television. 

 

Your HDTV retains the viewing mode from the last time you used a particular 
input (Comp/AV, HDMI and TV). 

 

Your HDTV is an ideal platform for viewing High Definition Content.  

 

Best image quality will be achieved by using an HDMI cable and input. The next 
best is Composite. Note: Composite cannot carry an HD quality image signal. 

 

Due to variances in broadcast practices, it is possible some image distortions 
can occur. 

 

Some Letterboxed (or “Widescreen”) versions of DVD movies are formatted for 
standard 4:3 Televisions. Your HDTV has the ability to expand this content so 
the entire screen is filled at the expense of image accuracy. To use this 
function, select Wide from the HDTV Settings App. 

 
 
 
No audio 

 Press 

Volume + (Up) on the remote control or side of your HDTV.  

 Press 

MUTE on the remote control to make sure that MUTE is not ON.  

 

Check the MTS Audio settings in the Tuner menu to insure they are set 
to Stereo/English. ( TV input only )

  

 

Verify that your HDTV Speakers are 

 in the 

 menu.  

 

Check the video/device cable integrity. Try another cable (HDMI, 
AV/Composite, Coax etc.) 

 

Change audio settings of the external device. 

 

If you are using an antenna, the signal strength of the channel may be low. 
Make sure your antenna is connected securely to your HDTV and move the 
antenna to an alternate location in the room or close to a window. 

 

Your HDTV will retain the last used volume level for each input. 

 

Press the Volume up on the remote control. 

 

Increase the volume of the external device using that device’s remote. 

 

Check video/device cable integrity. Try another cable (HDMI, AV/Composite, 
Coax etc.)  

 

Insure audio cables are tightly inserted into inputs. 

 

Try another device. 

 

Use another device input.