VIZIO P42HDTV10A Guia Do Utilizador
VIZIO P42 HDTV User Manual
Version 6/14/2006
28
www.VIZIOCE.com
2.6
Connecting an external Receiver/Amp
1.
Turn off the power to the Plasma TV and Receiver/Amp.
2.
Using an audio cable (white and red connectors), connect the cable to the audio input
connectors on the Receiver/Amp and connect the other end to the ANALOG OUT (gray area)
audio connectors at the rear of the Plasma TV.
connectors on the Receiver/Amp and connect the other end to the ANALOG OUT (gray area)
audio connectors at the rear of the Plasma TV.
3.
Turn on the power to the Plasma TV and Receiver/Amp.
4.
Then press the MENU button on the
remote control to open the On-Screen
Display (OSD) menu.
remote control to open the On-Screen
Display (OSD) menu.
5.
Press the on the remote control to
select the Audio Adjust menu.
select the Audio Adjust menu.
6.
Press the on the remote control to
select SPEAKERS.
select SPEAKERS.
7.
Press the on the remote control to
select OFF so that the sound from the
Plasma TV will now be routed through
your Receiver/Amp system.
select OFF so that the sound from the
Plasma TV will now be routed through
your Receiver/Amp system.
Optical Output of Audio received with HD Programs
If your sound system has a SPDIF (optical) digital audio input you can connect it to the optical DIGITAL
AUDIO OUT (gray area) at the rear of the
Plasma TV. This is active when receiving
digital audio with the programs from the
DTV input.
AUDIO OUT (gray area) at the rear of the
Plasma TV. This is active when receiving
digital audio with the programs from the
DTV input.
Note:
a)
Refer to your Receiver/Amp user manual to select the corresponding audio input.
b)
The audio output is not amplified and cannot be connected directly to external speakers.