VIZIO P42HDTV10A Guia Do Utilizador

VIZIO P42 HDTV User Manual 

Version 6/14/2006 

30 

 

www.VIZIOCE.com 

 
For ‘Preparing Your Plasma TV for Wall Mounting’, see page 6. 
 

1.  Connecting the Power Cable 

Connect the power cord to the power cord connector on the back of the Plasma TV, and then 
plug the power cord into an AC wall socket. 

2.  Connect Audio and Video Cables to the Plasma TV 

(see pages 16-29 for detailed steps) 

3.  Turning Power On 

Once all the components are connected, press the Power ON button on the side of the Plasma 
TV, or press the Power ON (Red) button on the remote control. 

4.  Select Input Source 

Select the Input Source for the Plasma TV by pressing the INPUT button 
on the side of the TV or using the Input button on the remote control.  
Pressing this button will cycle you through the following options: AV1, AV2, 
AV3 (Video), Component 1, Component 2, HDMI, RGB, TV and DTV. 

5.  Using TV with an Antenna or Cable 

If connecting to an antenna or cable source for the TV input, you will need 
to select the appropriate source within the On-Screen Display (OSD) 
menu and Auto Scan for the available TV channels. 
 
Please follow the instructions below: 

a.  Select TV input by pressing the INPUT button on the side of the Plasma TV or using the 

INPUT button on the remote control, or directly by pressing the TV button on the remote 
control. 

b.  Press the MENU button on the remote control to show the OSD menu. 
c.  Press the       button on the remote control twice to highlight the TV TUNER SET UP 

menu. 
 
 
 
 
 
 
 
 

Note: If you do not see this option within the OSD, you might have selected the wrong input in the 
previous steps and you will need to repeat step 4 (above) to select the correct input source.