Alpine cva-1014 Guia Do Utilizador
12
-EN
g
g
g
g
g
f
f
f
f
f
TITLE
:
:
:
:
:/J
J
J
J
J
BAND/TEL.
MODE
(Rotary
encoder)
encoder)
Preset buttons
(1 through 6)
(1 through 6)
FUNC
2 8
8
8
8
8
1 9
9
9
9
9
Changing the Channel Select Method
There are 2 ways to select a channel: either by
channel number (numeric order) or by channel
name (alphabetical order).
channel number (numeric order) or by channel
name (alphabetical order).
1
In XM or SIRIUS mode, press and hold :
:
:
:
:/J
J
J
J
J for
at least 2 seconds.
Each press changes the display between “CH
No.” and “CH NAME” on the monitor.
Each press changes the display between “CH
No.” and “CH NAME” on the monitor.
CH No :
Arranging channels in numeric order.
Press g
Press g
g
g
g
g or f
f
f
f
f
to find the desired
channel.
CH NAME : Arranging channels in alphabetical order.
Press g
g
g
g
g or f
f
f
f
f to find the desired
channel.
Storing of Channel Presets
1
Press SOURCE/POWER to select the XM or
SIRIUS mode.
SIRIUS mode.
2
Press BAND/TEL. to select the desired band
you want to store.
you want to store.
3
After tuning in the desired channel, press and
hold (for at least 2 seconds) any one of the
preset buttons (1 through 6) into which you
want to store the channel. The selected channel
is stored.
hold (for at least 2 seconds) any one of the
preset buttons (1 through 6) into which you
want to store the channel. The selected channel
is stored.
4
Repeat the procedure to store up to 5 other
channels onto the same band.
To use this procedure for other bands, simply
select the band desired and repeat the procedure.
A total of 18 channels can be stored in the preset
memory (6 channels for each band; XM1, XM2
and XM3 or SIRIUS1, SIRIUS2, SIRIUS3).
channels onto the same band.
To use this procedure for other bands, simply
select the band desired and repeat the procedure.
A total of 18 channels can be stored in the preset
memory (6 channels for each band; XM1, XM2
and XM3 or SIRIUS1, SIRIUS2, SIRIUS3).
NOTE
If you store a channel in a used preset memory, the current
channel will be cleared and replaced with the new one.
channel will be cleared and replaced with the new one.
SOURCE/
POWER
POWER
Checking the XM or SIRIUS Radio
ID Number
ID Number
A unique Radio ID number is required to
subscribe to SAT Radio programming. Each third
party XM or SIRIUS radio comes with this
number.
subscribe to SAT Radio programming. Each third
party XM or SIRIUS radio comes with this
number.
This number is an 8 character (for XM Radio) or
12 character (for SIRIUS Radio) alphanumeric
number. It is printed on a label found on the SAT
Receiver.
It can also be displayed on the screen of the CVA-
1014 in the following way.
12 character (for SIRIUS Radio) alphanumeric
number. It is printed on a label found on the SAT
Receiver.
It can also be displayed on the screen of the CVA-
1014 in the following way.
1
While receiving XM or SIRIUS, press g or
f to select channel “0.”
f to select channel “0.”
The unit alternately displays “RADIO ID” and the
number.
number.
2
To cancel the ID number display, set the channel
to other than “0.”
to other than “0.”
NOTES
• You cannot use “O,” “S,”“ I,” or “F” for the ID
Number (XM radio Receiver only).
• You can check the ID number printed on a label on
your third party, SAT Radio Receiver package.
• Perform this operation after selecting “CH No.” in
“Changing the Channel Select Method” (this page)
(XM radio Receiver only).
(XM radio Receiver only).
SAT Radio Receiver Operation (Optional)