Alpine cva-1014 Guia Do Utilizador

Press SOURCE/POWER to select the XM or
SIRIUS mode.

Press BAND/TEL. to select the desired band.

XM mode:

→ XM1 → XM2 → XM3

SIRIUS mode:

→ SIRIUS-1 (S1) → SIRIUS-2 (S2)
                SIRIUS-3 (S3) 

←

Press the channel preset button that has your
desired satellite channel in memory.

Channels are divided into categories. Category
Tuning allows you to search for a specific channel
by its category.

In XM or SIRIUS mode, press FUNC to select
Category Tuning mode.
The currently received category is displayed and
the “CATEGORY” (monitor) or “C” (sub-display)
indicator is lit.

Press 1 9 or 2 8 to select the desired category.
The selected category is immediately received.
Holding the button will continuously change the
category.

To search for a channel, press g

g

g

g

g or f

f

f

f

f

while your selected category is displayed.
The channels within the category are displayed in turn.
The selected channel is immediately received.

NOTE
If no operation is performed within 13 seconds, or
FUNC is pressed, the unit returns to normal mode.

You can search for a channel while listening to the
currently received channel. Categories or channel
names are listed on the display to be selected.

When the monitor is opened in XM or SIRIUS
mode, press and hold the   MODE (Rotary
encoder) for at least 2 seconds.
The Category or Channel Name list is displayed.
A triangle appears by the side of the currently
received channel or category.

NOTE
The previously displayed list (for category or channel
name) appears.

Press and hold :/J for at least 2 seconds to
switch the display between the Category list and
Channel Name list.

Press g or f to select the desired
category or channel.

When the Category list is displayed:

Select the desired category, and press and
hold :/J for at least 2 seconds. The Channel
Name list for the selected category is
displayed.

When the Channel Name list is displayed:

To select from other categories, press and
hold :/J for at least 2 seconds. The Category
list is displayed.

Press the   MODE (Rotary encoder) to receive
your selected channel.

• Press the   MODE (Rotary encoder) for at least 2

• You can directly select the category while the Channel

Name list is displayed. Press FUNC to activate
Category Tuning mode, and then press 1 9 or 2 8 to
select the category. The Channel Name list of the
selected category is displayed.