Canon 430 Guia Do Utilizador

• Since this is a lithium ion battery pack, you need not completely 

discharge it before recharging. It can be recharged at any point. 
However, since the maximum number of charge cycles is 
approximately 300 times (battery life), you are recommended to 
charge the battery pack after having discharged it completely to 
prolong battery life.

• It takes approximately 130 minutes to fully charge the battery pack 

from a fully discharged state (based on Canon’s testing standard). 
Charging it within a temperature range of 5° to 40 °C (41° to 104 °F) 
is recommended.

• Charge times may vary according to the ambient temperature and 

the battery pack’s charge state.

• See Battery Capacity (p. 147).
• You may hear a noise during charging. This is not a malfunction.

zKeep the battery pack terminals (

) clean at all times. Dirty 

terminals may cause poor contact between the battery pack and camera. 
Polish the terminals with a tissue or a dry cloth before charging or using 
the battery pack.

zDo not rapidly overturn or wave the battery charger around when it 

contains the battery pack. The battery pack could fly out.

zAt low temperatures, battery pack performance may be reduced and the 

low battery icon may appear earlier than usual. Under these conditions, 
resuscitate the battery pack by warming it in a pocket immediately before 
use. However, ensure that there are no metallic items in the pocket that 
could cause a short circuit, such as a key holder, etc.

zDo not place anything, such as tablecloths, carpets, bedding or cushions, 

on top of the battery charger while it is charging. Heat will build up and 
could result in a fire.

zDo not charge batteries other than Battery Pack NB-1LH or NB-1L in this 

charger.

zThe battery pack continues to discharge a minimal portion of its power 

while installed in the camera, even with the power off, or in the charger. 
This will shorten battery life.