ATN nvg7-cgt Guia Do Utilizador
3
4
OPERATION
• Take the monocular out of the case.
• Install the battery into the housing with the polarity order as shown on the scope. Battery
• Install the battery into the housing with the polarity order as shown on the scope. Battery
Type: 1.5 Volt, AA size .
• Press the button (short press - less than 1.5 sec.) to turn the unit on by the protective lens
cover still attached to the lens.
Do not turn the unit on in the daytime without the protec-
tive lens cap on. You should see green glow in the eyepiece.
• Observe the scene and adjust the diopter for optimal image clarity.
• You may now enter a dark environment or simply shut the lights off in order to darken the room.
• Next, remove the lens cap/daylight filter. Adjust the front lens for the distance of the focus.
• You may now enter a dark environment or simply shut the lights off in order to darken the room.
• Next, remove the lens cap/daylight filter. Adjust the front lens for the distance of the focus.
You should not have to readjust the diopter.
• To turn the unit off, push the button again by short press (less than 1.5 sec.).
FOCUSING
To focus the NVG7, first you will need to adjust the
diopter. Simply turn the diopter clockwise until it
stops. Then, while looking throught the diopter at an
object, slowly turn the diopter back counter clock-
wise until the grain in the image is sharp.
NOTE: We suggest that you focus the diopter
NOTE: We suggest that you focus the diopter
during daylight with the filter on.
Next focus the front lens until the image and the
Next focus the front lens until the image and the
grain are both sharp. When you are in low-light con-
ditions and the daylight filter is off, you may focus
the front lens to receive sharp image, the diopter
should not be adjusted.
NOTE: The front lens should be readjusted as you
NOTE: The front lens should be readjusted as you
view objects at different distances.
INFRA-RED ILLUMINATOR
Infra-red illuminators, or IR illuminators, are common
to night vision. The IR light greatly enhances the
performance of the NVG7 while remaining almost
totally invisible to the naked eye.
The NVG7 goggles have a built in IR with indicator
The NVG7 goggles have a built in IR with indicator
“ON” light within the FOV. To turn the IR on, push
the button by long press (more than 1.5 sec.). It
is important to remember that the IR illuminator is
simply an infra red light source, and like any light
source, it may loose its effectiveness over a great
distance.
To turn the IR off, push the button again by long
To turn the IR off, push the button again by long
press (more than 1.5 sec.).
NOTE: The IR will automatically turn off when the unit’s
NOTE: The IR will automatically turn off when the unit’s
power is turned off.
Built-in Infra-red
Illuminators
Diopter adjasting
Lens focus
adjusting