Nortel 4134 Guia Do Utilizador
192
PPPoE client configuration
Procedure steps
Step
Action
1
To enter configuration mode, enter:
configure terminal
2
To specify the name of the PPPoE interface to configure, enter:
interface virtual-access <pppoe-interface>
3
To specify the IP address for this interface, enter:
{address <ip-address/mask> | negotiated }
—End—
Table 97
Variable definitions
Variable definitions
Variable
Value
address <ip-address/m
ask>
ask>
Specifies the IP address for the interface.
negotiated
Specifies that the IP address for the interface is
obtained via PPP IPCP (IP Control Protocol) address
negotiation with the PPPoE server.
obtained via PPP IPCP (IP Control Protocol) address
negotiation with the PPPoE server.
Configuring PPPoE tunneling protocol
Configure the PPPoE tunneling protocol. The only available option in this
release is client mode (the default).
release is client mode (the default).
Procedure steps
Step
Action
1
To enter configuration mode, enter:
configure terminal
2
To specify the name of the PPPoE interface to configure, enter:
interface virtual-access <pppoe-interface>
3
To specify the IP address for this interface, enter:
protocol pppoe pppoe-mode [client]
—End—
Nortel Secure Router 4134
Security — Configuration and Management
NN47263-600
01.02
Standard
10.0
3 August 2007
Copyright © 2007, Nortel Networks
.