Nortel 4134 Guia Do Utilizador
Configuring PPP authentication method and parameters
193
Configuring PPPoE Ethernet interface
Configure the Ethernet interface on which PPPoE is enabled.
Procedure steps
Step
Action
1
To enter configuration mode, enter:
configure terminal
2
To specify the name of the PPPoE interface to configure, enter:
interface virtual-access <pppoe-interface>
3
To specify the Ethernet interface to use for PPPoE, enter:
pppoe ethernet <slot/port>
—End—
Configuring PPP authentication method and parameters
Configure the PPP authentication method and related parameters for the
PPPoE connection.
PPPoE connection.
Procedure steps
Step
Action
1
To enter configuration mode, enter:
configure terminal
2
To specify the name of the PPPoE interface to configure, enter:
interface virtual-access <pppoe-interface>
3
To configure the authentication method for the PPPoE interface,
enter:
enter:
ppp authentication {pap | chap | pap_chap | none}
[sent-username <username>] [password <password>]
—End—
Nortel Secure Router 4134
Security — Configuration and Management
NN47263-600
01.02
Standard
10.0
3 August 2007
Copyright © 2007, Nortel Networks
.