Nortel 4134 Guia Do Utilizador
Configuring an auto 6to4 tunnel
247
Figure 23
Auto 6to4 tunnel
Auto 6to4 tunnel
To configure an auto 6to4 tunnel, perform the following steps.
SR4134 1
Step
Action
1
To configure the IPv4-enabled interface, enter:
interface bundle wan1
link t1 2/0
encapsulation ppp
ip address 192.168.27.10 255.255.255.0
crypto untrusted
exit
2
To configure the IPv6-enabled interface, enter:
interface ethernet 0/1
ipv6 address 2002:c0a8:1b64::1/64
exit
3
To configure the tunnel interface, enter:
interface tunnel t1
ipv6 address 2002:c0a8:1b64::1/64
tunnel source 192.168.27.10
tunnel mode ipv6 6to4
exit
Nortel Secure Router 4134
Security — Configuration and Management
NN47263-600
01.02
Standard
10.0
3 August 2007
Copyright © 2007, Nortel Networks
.