Nortel 4134 Instrução De Instalação
Hot swapping hardware components
41
VPN/IPSec module
The VPN/IPSec module provides secure processing of packets originating
from any external interface, although the VPN module is not directly
connected to any external interface.
from any external interface, although the VPN module is not directly
connected to any external interface.
The VPN module has a 140-pin connector on the bottom of the module,
which allows you to install the VPN/IPSec module on the Main Board of the
Secure Router 4134. The following figure shows the VPN/IPSec module in
relation to the Main Board.
which allows you to install the VPN/IPSec module on the Main Board of the
Secure Router 4134. The following figure shows the VPN/IPSec module in
relation to the Main Board.
Figure 19
Internal VPN/IPSec module
Internal VPN/IPSec module
Internal system compact flash
The internal compact flash contains the system image. This slot is identified
in system software as CF0.
in system software as CF0.
Hot swapping hardware components
This section lists the Secure Router 4134 hardware components that you
can service while the system is powered.
can service while the system is powered.
Nortel Secure Router 4134
Installation — Hardware Components
NN47263-301
01.02
Standard
10.0
7 August 2007
Copyright © 2007, Nortel Networks
.