Optoma HD65 Guia Do Utilizador
3
English
Installation
Powering On the Projector
1. Remove the lens cap.
2. Ensure that the power cord and signal cable are securely
2. Ensure that the power cord and signal cable are securely
connected. The Power LED will be red.
3. Turn on the lamp by pressing “Power/Standby” button ei-
ther on the top of the projector or on the remote. The Power
LED will flash green.
The startup screen will display in approximately 10 seconds.
The first time you use the projector, you can select your
preferred language from quick menu after the startup screen
display.
4. Turn on your source (computer, notebook, video player,
etc.). The projector will detect your source automatically.
If the screen displays “No Signal”, please make sure the signal
cables are securely connected.
If you connect multiple sources at the same time, press the
“Source” button on the control panel or direct source key on the
remote control to switch between inputs.
Powering On/Off the Projector
Turn on the
projector first and
then select the
signal sources.
2
Power
Lens Cap
1
Power LED