Optoma HD65 Guia Do Utilizador

4

English

Warning Indicator



  When the “LAMP” indicator lights red, it indicates problem 

with the lamp. Please contact your local reseller or service 

center. See pages 48-49. 



  When the “TEMP” indicator lights red, it indicates the pro-

jector has overheated. The projector will automatically shut 

itself down.

  Under normal conditions, the projector can be switched on 

again after it has cooled down. If the problem persists, you 

should contact your local dealer or our service center. 

See pages 48-49. 



  When the “POWER” indicator flashes red, it indicates the 

fan has failed. Please contact your local dealer or our service 

center. See pages 48-49. 

Powering Off the Projector

1.   Press the “Power” button to turn off the projector lamp, 

you will see a message displayed on the projector’s screen. 

2.   Press the “Power” button again to confirm,  

otherwise the message will disappear after 5 seconds.

  When you press “Power” button second, the system will 

show the timing countdown on the screen. 

3.  The cooling fans continue to operate for about 10 seconds 

for cooling cycle. When the Power LED turn red, the pro-

jector has entered standby mode.



4.  Disconnect the power cord from the electrical outlet and 

the projector.

5.  Do not turn on the projector immediately following a 

power off procedure.