Optoma hd7100 Manual Do Utilizador
20
Connections and Setup
Using the Adjustment Feet
Use the adjustment feet to level the projector
when it is placed on an uneven surface or
when the screen is slanted.
when it is placed on an uneven surface or
when the screen is slanted.
The projection can be made higher by
adjusting the projector when it is in a location
lower than the screen.
adjusting the projector when it is in a location
lower than the screen.
1
Press the foot releases and lift
the projector to the desired
angle.
the projector to the desired
angle.
2
Remove your hands from the foot
releases. When the adjustment
feet have locked in position,
place the projector down.
releases. When the adjustment
feet have locked in position,
place the projector down.
• If the screen is at an angle, the
adjustment feet can be used to adjust
the angle of the image.
the angle of the image.
Notes
• The projector is adjustable up to
approximately 11 degrees from the standard
position.
position.
• When the height of the projector is adjusted,
the image may become distorted
(keystoned), depending on the relative
positions of the projector and the screen.
See page 44 for details on keystone
correction.
(keystoned), depending on the relative
positions of the projector and the screen.
See page 44 for details on keystone
correction.
Info
• When lowering the projector, be careful not
to catch your fingers in the area between
the adjustment foot and the projector.
the adjustment foot and the projector.
Foot releases
Adjustment feet