Optoma hd7100 Manual Do Utilizador

Position the projector perpendicular to the screen with all feet flat and level to achieve an optimal image.

„ Place the projector at the required distance from the screen 

according to the desired picture size. (See page 23)

• The projector lens should be perpendicular (square-on) to the screen. If the horizontal line passing 

through the lens center is not perpendicular to the screen, the image will be distorted, making viewing 
difficult. 

• For an optimal image, position the screen so that it is not in direct sunlight or room light. Light falling 

directly on the screen washes out the colors, making viewing difficult. Close curtains and dim the lights 
when setting up the screen in a sunny or bright room.

• A polarizing screen cannot be used with this projector.

• The distance from the screen to the projector 

depends on the size of the screen.

• The default setting can be used, when placing the 

projector in front of the screen. If the projected 
image is reversed or inverted, readjust the setting to 
“Front” for “PRJ Mode” in the “Options” menu.

• Place the projector so that an imaginary horizontal 

line that passes through the center of the lens is 
perpendicular to the screen.

2D Lens Shift:
• The vertical display (Biggest) is (+13/20V / - 

1/2V) screen. 

• The horizontal display (Biggest) is ±3/40 

screen. (±15%)

• It is recommended that images be projected 

onto the dashed line octagonal area for fine 
image quality.

• There is a tolerance of ±3% in the formula 

above.

90

Audience

ST

A

T

US

EXIT

INPUT

MENU

ECO

Focus

Zoom

LENS  SHIFT

(H)

LENS  SHIFT

(V)

ENTER

90