Avocent onsite Instrução De Instalação

1. Rackmounting the AlterPath OnSite

 

2   

 AlterPath OnSite Quick Start Guide

Two brackets are supplied with eight screws (including two spares) for attaching the brackets.

T

1. If rackmounting the OnSite, connect one bracket on each side on the front or back edges. See Chapter 

2, “Installation,” in the AlterPath OnSite Installation Guide for placement of the brackets for different 
types of mounting.

2. Mount the OnSite in a rack or on a wall, or place it on a desktop or table. 

Connect a CAT5 or greater Ethernet cable from an Ethernet switch, router, or local area network (LAN) 
port to the Ethernet port on the OnSite.

Make sure all devices are previously configured and powered off, because some components of connected 
equipment may not be hot-pluggable. See “Preparing to Connect Devices to the t” in the AlterPath OnSite 
Installation Guide for preparatory tasks.

T

Note: Make sure that each server’s mouse settings are configured as described in the installation guide. 
Otherwise, a user’s mouse cannot track properly over the KVM connection.

1. Connect the appropriate AlterPath KVM Terminator to the server.

Note: When making a PS/2 connection to a Windows server, make sure to connect the green connector to 
the green mouse port before connecting the purple connector to the purple keyboard port.

2. To extend the connection from the server to the OnSite, connect a RJ-45 to RJ-45 CAT5 cable up to 

500 feet long to the KVM Out end of the terminator.

3. Connect the RJ-45 connector on other end of the cable to a KVM port on the OnSite.

4. Repeat Step 2 through Step 3 for all servers to be connected to the KVM ports. 

5. Make sure that mouse settings have been configured 

T

1. Connect a DB-9 to DB-9 crossover serial cable from a serial port to the CONSOLE port on the device.

2. Repeat Step 1 for all devices to be connected to the serial ports.