Extreme 3802 Manual Do Equipamento
100
Extreme Networks Consolidated Hardware Guide
Summit Switch Models
NOTE
For more information about configuring and using the Summit200-24 switch, see the Summit 200 Series
Switch Installation and User Guide.
Switch Installation and User Guide.
Fan LED
Color
Indicates
Green
Amber blinking
The fan is operating normally.
A failed condition is present on the fan.
Port Status LEDs (Ports 1–26)
Color
Indicates
Green
Green blinking
Off
Link is present; port is enabled.
Link is present, port is enabled, and there is activity on the port.
Link is not present or the port is disabled.
Media-Selection (Fiber) LEDs (Ports 25 and 26)
Color
Indicates
Green
Off
Fiber link is selected; mini-GBIC is present and being used for the
Gigabit Ethernet uplink.
Gigabit Ethernet uplink.
1000BASE-T link is selected; the switch is using the RJ-45 port
for the Gigabit Ethernet uplink.
for the Gigabit Ethernet uplink.
Unit Stacking ID Number LED
Color
Indicates
N/A
When several Summit 200-24 switches are interconnected
(stacked), each switch will be assigned a unique stacking ID
number that will be visible in the unit stacking ID number LED.
The switch acting as the stack master will be assigned the
number 0, which is the default.
(stacked), each switch will be assigned a unique stacking ID
number that will be visible in the unit stacking ID number LED.
The switch acting as the stack master will be assigned the
number 0, which is the default.
Table 32: Summit 200-24 switch LED behavior (continued)