Citel 1000 Manual Suplementar
070707
Copyright 2007 Citel plc All Rights Reserved
EXTender LED Status
This document briefly explains the Front Panel LED status of the PBXgateway and EXTender. A more
detailed explanation of these states along with details of the LAN port LED’s can be found in the System
Administrator’s Guide included with your unit or download from our website
www.citel.com
LED
COLOR STATE
MENU
STATE
EXPLANATION
PWR
Solid Red
ALERT
DRAM Test Failed. Contact Citel Tech Support.
Solid Yellow
ALERT
Self-Test Diagnostic Failure. Attempt a reboot – power
cycle. If LED persists, please contact Citel Tech Support.
cycle. If LED persists, please contact Citel Tech Support.
Solid Green
ON
Normal Operation.
WAN 1 & 2
Blank – Dark
DISABLED Respective WAN port is presently disabled in the UI menu.
Solid Red
DOWN
No connection to CSU. Check cabling. Please use the
cable provided with the EXTender unit. This is a DB25
straight through Male to Female DTE to DCE cable:
RS-530.
cable provided with the EXTender unit. This is a DB25
straight through Male to Female DTE to DCE cable:
RS-530.
Solid Yellow
READY
CSU UP but the WAN link is not ACTIVE. Check CSU
setting for loopback. No loopback should be enabled.
setting for loopback. No loopback should be enabled.
Solid Green
UP
CSU UP but the WAN link is not ACTIVE. Check the T1
channel/port mapping and timing on CSU. Verify that the
WAN port and CSU on the distant end are configured the
same.
channel/port mapping and timing on CSU. Verify that the
WAN port and CSU on the distant end are configured the
same.
Slow Green Flash (1x)
ACTIVE
Respective WAN port is ACTIVE. The connection to the
other unit is alive and phones are extended.
other unit is alive and phones are extended.
Fast Green Flash (2x)
TEST
Respective WAN port is in TEST Mode.
WAN 3
Blank – Dark
N/A
Analog card not available or disabled in menu.
Remote part
Solid Yellow
ONHOOK
Analog card is enabled and ready.
#’s with z
Flashing Yellow
RINGING
Analog line is ringing.
E-6000z-RUM
Solid Green
#OFFHK
Analog line is off hook and in use.
PORTS
Blank – Dark
XX
Port is disabled in menu.
Flickering Green
NC
Port is enabled but no connection to local equipment (PBX
or Phone). Check all wiring / cables. This is a local issue.
or Phone). Check all wiring / cables. This is a local issue.
Solid Green
RD
Port is enabled and has continuity to local equipment (PBX
or Phone) but not extended. Verify connect error / network.
or Phone) but not extended. Verify connect error / network.
Slow Green Flash (1x)
UP
Port is extended and on hook.
Fast Green Flash (2x)
VC
Port is extended and off hook.
For Further Assistance, Please Contact Citel Technical Support @ 1-877-248-3587