Citel 6000 Guia Do Utilizador
PBXgateway
™
& EXTender
TM
6000 System Administrator’s Guide
103
this port.
Note: The PBXgateway uses a zero base key mapping. For example, in
Definity PBX key 1 is the first line appearance key, you should assigning
key '0' in the PBXgateway as the line key.
Note: The PBXgateway uses a zero base key mapping. For example, in
Definity PBX key 1 is the first line appearance key, you should assigning
key '0' in the PBXgateway as the line key.
ConneX Link Key
(Norstar Only)
(Norstar Only)
When the EXTender needs to call the ConneX user it needs to know
what key to “press” to access a line and dial the user. Use 0 (zero).
what key to “press” to access a line and dial the user. Use 0 (zero).
RCX Phone Lamp
This item is a RemoteConneX specific feature. This parameter is used to
enable or disable the 'Message Waiting Lamp' on the RemoteConneX
Phone.
Note: The lamp indication will only be updated upon login/logout of the
ConneX port.
enable or disable the 'Message Waiting Lamp' on the RemoteConneX
Phone.
Note: The lamp indication will only be updated upon login/logout of the
ConneX port.
Transfer Key
(Meridian Only)
(Meridian Only)
Assigns Transfer call function to a specific key mapped on the PBX.
Conference Key
(Meridian Only)
(Meridian Only)
Assigns Conference call function to a specific key mapped on the PBX.
Email...
The SMTP Server must be configured. Please see the procedure below.
VMWI Email
Voice Message Waiting Indicator (VMWI). Enabling this feature will
trigger an email to be sent to you every time a voice mail has been left in
your corporate mailbox.
trigger an email to be sent to you every time a voice mail has been left in
your corporate mailbox.
Call Log Email
Enabling this feature will trigger an email to be sent to you with the Caller
information. This is useful when you have lost access to your voice
services.
Note, that with Norstar, if you receive a 2
information. This is useful when you have lost access to your voice
services.
Note, that with Norstar, if you receive a 2
nd
call while on an active call, an
email will not be sent, the call will behave normally otherwise. It is not
desirable to interrupt the voice path to send this information.
desirable to interrupt the voice path to send this information.
Email Address
Enter the email address of the ConneX user. Note, that invalid
characters may be entered in this field such as the $ symbol. Ensure you
have entered the correct address. To edit an address simply use your
backspace, delete, right arrow, or left arrow keys to scroll and insert
characters. Press Enter to accept the address.
characters may be entered in this field such as the $ symbol. Ensure you
have entered the correct address. To edit an address simply use your
backspace, delete, right arrow, or left arrow keys to scroll and insert
characters. Press Enter to accept the address.
Configuring the SMTP Server (Gateway Only)
1. Access the SMTP Server Menu using the following path:
Path Gateway->Configuration->IP->SMTP
Figure 61: SMTP Parameters
2. Enter the IP address or Name of your corporate SMTP Server. Ensure DNS has been
enabled and configured when entering name instead of IP Address. See ‘DNS on page’ 81
for details on enabling the DNS service.
for details on enabling the DNS service.
3. Enter the email address of the ConneX user in the SMTP Mailbox field. This parameter
specifies the FROM address of the email being sent out. Usually, you would assign a virtual
email address (eg.ConneX@PBXgateway) as a notification to the user who receive the email.
email address (eg.ConneX@PBXgateway) as a notification to the user who receive the email.
4. Enter the ConneX User Name in the SMTP User field. Ask your System Administrator if you
are unsure if this is required for your SMTP services.