Citel 6000 Guia Do Utilizador
PBXgateway
™
& EXTender
TM
6000 System Administrator’s Guide
81
DNS Set up (Gateway and Remote)
The Domain Name System (DNS) is used in IP networks for translating host domain names (ie:
MCK.com) into IP addresses. Basically, if you are not sure of the IP address of the device you are trying
to connect to, and there is a DNS server on the network with DNS enabled, simply type in the name of
the device and the IP address will be displayed.
MCK.com) into IP addresses. Basically, if you are not sure of the IP address of the device you are trying
to connect to, and there is a DNS server on the network with DNS enabled, simply type in the name of
the device and the IP address will be displayed.
Settings
The following DNS settings are required:
Enabled- This simply enables or disables the parameter.
Server IP Address – This is the IP Address of the DNS. Used to resolve names to IP
addresses.
Domain Name – Name assigned to the network subnet on which the DNS server
resides.
Note: At this time, DNS is not required for any PBXgateway or Remote unit operation.
Therefore, we recommend leaving this parameter disabled.
Enabled- This simply enables or disables the parameter.
Server IP Address – This is the IP Address of the DNS. Used to resolve names to IP
addresses.
Domain Name – Name assigned to the network subnet on which the DNS server
resides.
Note: At this time, DNS is not required for any PBXgateway or Remote unit operation.
Therefore, we recommend leaving this parameter disabled.
Enabling/Disabling DNS (Gateway and Remote)
1. Access the IP Menu from the Main Menu using the following path:
Path: ->Configuration->IP
->
DNS
The following menu appears:
Figure 34: DNS Menu
2. Press
the
→ key to the Enabled parameter. Enabled (Yes) or (No).
3. Press
the
→ and ↓ key to the Domain Name parameter. Type in the name of the domain
that the PBXgateway belongs to. Example: MCK.com
Note: The Domain name must be provided by the network administrator.
4. Press the and
↓ key to the Server IP Address. Type in the address of the server that the
PBXgateway belongs to.
Note: The Server IP Address must be provided by the network administrator.
5. Press the
← key to go accept changes and go back to the Configuration Menu. Press the ↓
key to the Save option.
6. Press Enter to save changes to the active config (.swt or .rmt) file.