Citel 6000 Guia Do Utilizador
PBXgateway
™
& EXTender
TM
6000 System Administrator’s Guide
82
System Parameters
Assign a Name to the Unit (Gateway and Remote)
The MI provides a means of identifying the Gateway/EXTender on the network. This
procedure explains the method of assigning a name to the PBXgateway for identification
purposes.
Note: This name is used strictly for ID purposes only. It is not an IP host name.
procedure explains the method of assigning a name to the PBXgateway for identification
purposes.
Note: This name is used strictly for ID purposes only. It is not an IP host name.
Procedure
1. Access the System Menu from the Main Menu using the following path:
Path: ->Configuration->System
The following menu appears:
The following menu appears:
Figure 35: System Menu
2. Assign a Name to the PBXgateway continued
3. Press
3. Press
the
→ key and type in a name for the PBXgateway.
Note: The name must not exceed 20 characters.
4. Press the
← key to accept changes and go back to the Configuration Menu.
5. Press the
↓ key to the Save parameter.
6. Press Enter to save changes to the active config (.rem or .swt) file.
This is where the name of
the Gateway is displayed.
the Gateway is displayed.