Citel 6000 Guia Do Utilizador
PBXgateway
™
& EXTender
TM
6000 System Administrator’s Guide
84
System Parameters - Remote Only
1. Access the System Menu from the Main Menu using the following path:
Path: Remote->Configuration->System
The following menu appears:
The following menu appears:
Figure 37: Gateway Time Offset - Remote System Menu
2. Select
Use Gateway Time. When enabled [Yes], the EXTender will use the PBXgateway
time to stamp all logging once connected to the PBXgateway.
3. Enter a value the represents the time difference between the Remote and the
PBXgateway. This is used to compensate for a time difference between cities. For example
the Gateway is at a corporate office in Boston and the Remote is in Calgary. Set the value
to -2. A call made from Boston to Calgary at 10:00am central time will show up as 8:00am
mountain time. This will ensure that the time stamp on logs as well as the time appearing
on your phone set will be correct.
the Gateway is at a corporate office in Boston and the Remote is in Calgary. Set the value
to -2. A call made from Boston to Calgary at 10:00am central time will show up as 8:00am
mountain time. This will ensure that the time stamp on logs as well as the time appearing
on your phone set will be correct.
4. Press
the
↓ key to the Console Baud parameter. Press the → key to modify the setting.
Note: The <Default> setting is 9600.
5. Press
the
→ key to the Modem Init String. This is the AT Command used to initialize the
modem.
6. Press
the
← key to accept changes and go back to the Configuration Menu.
7. Press
the
← key to the Save parameter.
8. Press Enter to save changes to the active config (.rmt) file.