Revel f50 Guia Do Utilizador
Figure 3. Unpacking the Revel
Performa F50a loudspeaker
Performa F50a loudspeaker
Warning: Do not attempt to lift or move the F50a alone. Proper
lifting requires at least two strong people. When lifting the F50a,
stand as straight as possible using the leg muscles to lift. Do not
attempt to lift the F50a while bending at the waist. When
moving the F50a, rock it side-to-side into the desired position.
Failure to follow these procedures may result in personal injuries
and/or loudspeaker damage.
lifting requires at least two strong people. When lifting the F50a,
stand as straight as possible using the leg muscles to lift. Do not
attempt to lift the F50a while bending at the waist. When
moving the F50a, rock it side-to-side into the desired position.
Failure to follow these procedures may result in personal injuries
and/or loudspeaker damage.
To unpack the F50a loudspeaker:
1. Place the packing carton on its side and fully open the top
flaps as shown Step 1 of Figure 3 (above).
2. Without allowing the top flaps to close, stand the packing car-
ton in an inverted position as shown in Step 2 of Figure 3
(above).
(above).
3. Lift the packing carton off of the loudspeaker as shown in
Step 3 of Figure 3. Use caution to avoid damaging the
loudspeaker cabinet and objects located above the packing
carton. At this point, the loudspeaker will be upside-
down.
loudspeaker cabinet and objects located above the packing
carton. At this point, the loudspeaker will be upside-
down.
4. Remove the bottom pad and the front and back middle pads.
These items are identified in Figure 4 (next page). Then,
remove the grille from the back middle pad.
remove the grille from the back middle pad.
7
REVEL PERFORMA F50a
Owner’s Manual
TOP
BOTTOM
BOTTOM
2
1
TOP
3