Revel embrace Guia Do Utilizador

SYSTEM OPTIMIZATION

The EMBRACE may be operated in either dipole/bipole, remote
dipole/bipole, or Dual Drive™ mode. Please refer to the appropri-
ate section to optimize your system response.

DIPOLE OR BIPOLE MODE OPERATION

1. After connecting the EMBRACE speakers and with system

power off, initially set the HIGH FREQUENCY LEVEL con-
trol on the rear panel to the “0” position, as shown in Figure 19.

2. Set the EMBRACE mode switch to BIPOLE or DIPOLE:

• The 

dipole position should be used for the greatest freedom

from “localization” and is appropriate for all film sound,
since it is always mixed using non-localized surrounds. Most
acoustic recordings, including classical, are mixed utilizing
the surrounds for a natural ambiance. The dipole mode is
also best for such recordings. 

• The bipole position may be selected for some discrete multi-

channel recordings that feature equal emphasis on the front
and surround (rear) loudspeakers.

EMBRACE Rear

Set HIGH FREQUENCY
LEVEL Control To
“0”

Set MODE Control To
“Dipole” Or “Bipole”

Set REAR WALL
PROXIMITY Control
To Match EMBRACE
Placement

Mode

Control

(on front)

Connector Panel

Remote

Dipole

Bipole

xxxx