Revel salon Guia Do Utilizador
Figure 2. The SALON transducer
and connection locations.
and connection locations.
DESCRIPTION
SALON features a transducer complement (see Figure 2) of three
8-inch woofers, a 6.5-inch midbass driver, a 4-inch midrange, and
1.1-inch tweeter. A second 0.75-inch tweeter (on the rear) provides
added high-frequency energy to enhance overall “room response.”
8-inch woofers, a 6.5-inch midbass driver, a 4-inch midrange, and
1.1-inch tweeter. A second 0.75-inch tweeter (on the rear) provides
added high-frequency energy to enhance overall “room response.”
Combined with an individually-optimized crossover network, this
transducer arrangement results in an extraordinary off-axis
response that provides a large “listening window” and an uncolored
in-room response, even in the presence of strong wall reflections.
transducer arrangement results in an extraordinary off-axis
response that provides a large “listening window” and an uncolored
in-room response, even in the presence of strong wall reflections.
WOOFERS
For uncompressed dynamic range, each SALON uses three 8-inch
mica/carbon-filled co-polymer dome woofers with these features:
mica/carbon-filled co-polymer dome woofers with these features:
• The woofer’s radiating surface is made of an injection-molded
polymer material with incredible stiffness and internal damping.
• Optimized magnetic circuits to minimize harmonic distortion.
• Oversized 1.5-inch diameter voice coil with flat aluminum wire
offer higher power handling and long excursion capability.
MIDBASS
For ideal midbass reproduction, each SALON uses a 6.5-inch
mica/carbon-filled co-polymer dome midbass with these features:
mica/carbon-filled co-polymer dome midbass with these features:
• A long voice-coil excursion within an advanced suspension.
• A copper shorting ring for less inductance and flux modulation.
SALON
Owner’s Manual
4
Install straps for
single-wired operation
Remove straps
for bi-wire
or bi-amp
for bi-wire
or bi-amp
Install straps for
single-wired operation
Low Frequency Input
High Frequency Input
Revel Corporation
Chatsworth, California
Made in U.S.A.
Chatsworth, California
Made in U.S.A.
Serial Number
TM
0
-3
Off
+1
-1
0
+.5
-.5
Front Tweeter Level
Rear Tweeter Level
0
+
LF Compensation
xxxx
SALON Front
(without grilles)
SALON Rear
Tweeter
Woofer Port
Rear Tweeter
Level Control
Level Control
LF Compensation
Control
Control
Front Tweeter
Level Control
Midrange
Midbass
Woofer
Woofer
Woofer
Connectors (with
shorting straps)
Tweeter