Revel salon Guia Do Utilizador

Página de 24
WARNING
Figure 3. Unpacking a 
SALON carton.
UNPACKING
IMPORTANT! Do not attempt to lift a SALON  from its pack-
ing carton alone – at least two strong people will be needed to
unpack the product properly. To avoid injury, use extreme care
during unpacking. Always stand as straight as possible and use
your leg muscles to lift a SALON. Do not lift a SALON while
bending from the waist. 
Each SALON is packed in its own carton with a shipping weight
of 240 pounds (108.9 kg). To avoid personal injury and possible
product damage, we strongly urge you to enlist additional help
before unpacking either carton. 
To unpack a SALON, perform the following steps:
1.  Stand a SALON in an upright position.
2.  Carefully remove all staples from rear flaps. Open the flaps and
tilt the unit forward so that the bottom flap can be positioned
under the carton, as shown in Figure 3. 
3.  Lay unit on its back with all flaps open. Lift carton off the unit
and set it aside.  
4.  Place the SALON in an upright position and then remove the
four (4) foam packing strips from the sides, as shown in
Figure 4 (on the next page).
5. Tilt the cabinet forward and remove bottom rear end pad, using
caution to avoid touching the front tweeter or midrange.
6. Tilt the cabinet backward and remove bottom front end pad,
using caution to avoid touching the front tweeter or midrange.
SALON
Owner’s Manual
6
Tilt carton forward and
tuck bottom flap under
This end up
Front
This end up
Rear
TM
TM