Blomberg dw 34100 Guia Do Utilizador
6. OPERATING THE DISHWASHER
CAUTION
ON/OFF BUTTON
Turn the dishwasher on with the On/Off
button. When turning on, the icon on the
display module of the last used program will
light up.
START/PAUSE BUTTON
START/PAUSE BUTTON
Use this button to start the selected
program. When the button is pressed
once, the light on the button will turn on.
Stop the program with the Start/Pause button.
DISPLAY
DISPLAY
Select delay time with Time Delay button
(depending on model) and water hardness
level in the service mode are displayed.
TIME DELAY BUTTON (DEPENDING
TIME DELAY BUTTON (DEPENDING
ON MODEL)
This option enables you to start the
selected program with a delay of 1 to 24
hours.
1. Delay time is adjusted by pressing the
1. Delay time is adjusted by pressing the
Time Delay button (press several
times).
2. After adjusting the delay time, press
the Start/Pause button.
3. Close the door. At the end of the delay
set, the program starts automatically.
Ý
Notice
HOW TO USE YOUR DISHWASHER:
FUNCTION BUTTONS
1
Avoid opening the door during the washing
process. This interrupts the washing process,
and hot steam will escape. Hot steam can cause
burns and other serious injuries. When the door
is closed, the program will continue.
1 On/Off button
2 Rinse aid level indicator light *
3 Salt level indicator light *
7 Cycle Select button
4 Display
5 Time Delay button *
6 Start/Pause button
11
* Depending on model
7
2 4
5 6
3
1. Open the door and load the dishwasher.
2. Check that both upper and lower spray arms
2. Check that both upper and lower spray arms
move freely.
3. Fill enough detergent into the detergent
dispenser and close the lid.
4. Push in the On/Off button 1 and check that
the display lights come on.
5. Check the rinse aid level indicator light. 2 If
necessary, refill rinse aid. (depending on model)
6. Check the salt level indicator light. 3 If
necessary, refill salt. (depending on model)
7. Use the Cycle Select button 7 to choose your
washing program.
8. Start the program with the Start/Pause button.
6
9. Close the door and the program will start.
10. When the wash program has ended, an
10. When the wash program has ended, an
electronic beep will sound and will continue
every 10 seconds. After 5 minutes of elapsed
time the sound will stop. The beep can also be
stopped by opening the door or by pressing
the On/Off button. 1
11. Press the On/Off button 1 and open the door
after the program is completed. The indicator
lights will go off.
12. Allow your dishes to cool for 20 minutes, with
the door open.
13. Unload the dishes. Begin with the lower rack.
During a wash program the Time Delay option
does not function.
CYCLE SELECT BUTTON
Use the Cycle Select button to select the desired
program. The icon of the corresponding program
will light up.