Blomberg dw 34100 Guia Do Utilizador

WARNING

If this indicator light comes on,

you need to refill rinse aid.

You can also tell whether rinse

aid must be refilled by looking

at the rinse aid dispenser. When

the visual fill indicator is dark,

there is enough rinse aid in the

dispenser.

When the color is light, open

the dispenser and refill rinse

aid.

When this indicator light comes

on, you must refill special salt.

Only u

se special dishwasher

salt in your machine to soften

the water.

The salt content can be read on

the container for the salt. When

the visual fill indicator is dark,

there is enough salt in the

container.

When the color is light, open

the container and add

dishwasher salt.

RINSE AID LEVEL INDICATOR LIGHT

(DEPENDING ON MODEL)

3 SALT LEVEL INDICATOR LIGHT

(DEPENDING ON MODEL)

Depending on the stage of the program

you have cancelled, there may be

detergent residue or rinse aid inside

the machine and on the dishes. Make

sure the items in the dishwasher are

not used before washing properly.

Ingestion or inhalation of detergent or

rinse aid may cause serious injury.

Avoid contact with skin and eyes and

keep children and infirm persons away

from these materials.

Depending on the length of the terminated

program detergent and rinse aid may still be in

the dispensers.

Ingestion or inhalation of detergent or rinse aid

may cause serious injury. Avoid contact with

skin and eyes, and keep children and infirm

persons away from these materials.

Dark : Sufficient rinse aid

Light: Refill rinse aid

Visual indicator

CANCELLATION OF A PROGRAM
To cancel a program while the dishwasher

is running:
1. Open the door gently.
2. Press and hold Start/Pause button for

5 seconds. The indicator light will start

flashing.

3. Close the door.
4. The dishwasher will drain the water

inside the machine for 45 seconds. At

the end of the cycle a beep will sound.

You can choose and start a new

program.

PROGRAM CHANGE

To change the program selection while the

dishwasher is running:
1. Open the door.

2. Press Start/Pause and select a new

program.

3. Press Start/Pause again, to start.

SALZ