Panasonic AG-AC160 Guia Do Utilizador
29
Preparation
Fitting the eye cup
Attach the eye cup by fitting the eye cup holder and
the ridges of the eye cup together.
the ridges of the eye cup together.
•
Turning the eye cup after attaching it may
cause the eye cup holder to come off. If the eye
cup holder does come off, see “Cleaning the
viewfinder” (Page 106 of Vol.2) and refit it.
cause the eye cup holder to come off. If the eye
cup holder does come off, see “Cleaning the
viewfinder” (Page 106 of Vol.2) and refit it.
Eye cup holder
Eye cup
Ridges
The remote control
Inserting the battery
1
Remove the holder while pushing the catch
in the direction shown by arrow (1).
(1)
(2)
2
Insert the battery with the side marked with
<+> facing up.
3
Return the holder to its original position.
•
When the battery (CR2025) runs out, replace
it with a new one. (Battery life depends on the
frequency of usage but is approximated at
about one year.)
If the remote control unit fails to work even
when it is operated near the camera’s remote
control sensor, it means that the battery has
run out.
it with a new one. (Battery life depends on the
frequency of usage but is approximated at
about one year.)
If the remote control unit fails to work even
when it is operated near the camera’s remote
control sensor, it means that the battery has
run out.
•
Keep the battery out of the reach of
children.
Remote control usable range
For the remote control sensor,
Distance: Approx. within 5 m
Angle: Approx. 10° upward, 15° downward, and
15° sideways
(using the accessory battery)
Distance: Approx. within 5 m
Angle: Approx. 10° upward, 15° downward, and
15° sideways
(using the accessory battery)
Remote control
sensor (rear)
Remote control
sensor (front)
•
These are the operation range values when the
remote control is used indoors. If used outdoors
or if strong light is hitting the remote control
sensor, the remote control may not operate
properly even within the said ranges.
remote control is used indoors. If used outdoors
or if strong light is hitting the remote control
sensor, the remote control may not operate
properly even within the said ranges.
•
The remote control is set to [OFF] in the factory
settings. When using the remote control, set the
[IR REMOTE] on the [OTHER FUNCTIONS]
menu to [ON]. (Page 97 of Vol.2)
settings. When using the remote control, set the
[IR REMOTE] on the [OTHER FUNCTIONS]
menu to [ON]. (Page 97 of Vol.2)