Panasonic AG-AC160 Guia Do Utilizador
30
Turning the camera ON/OFF
Turning on the power:
Turn the POWER/MODE switch up to the <ON>
position while pressing the lock release button.
The mode lamp <CAMERA> lights up in red and
the camera goes to recording standby status
(<CAMERA> mode).
position while pressing the lock release button.
The mode lamp <CAMERA> lights up in red and
the camera goes to recording standby status
(<CAMERA> mode).
•
If the POWER/MODE switch is turned up to the
<MODE> position, the mode lamp <PB> will light
up in green and the camera goes to <PB> mode.
(Page 54 of Vol.2)
<MODE> position, the mode lamp <PB> will light
up in green and the camera goes to <PB> mode.
(Page 54 of Vol.2)
•
Every time the switch is turned to the <MODE>
position, the mode will change between
<CAMERA> mode and <PB> mode.
position, the mode will change between
<CAMERA> mode and <PB> mode.
Turning off the power:
Turn the POWER/MODE switch up to the <OFF>
position while pressing the lock release button.
The mode lamp <CAMERA>/<PB> goes off.
position while pressing the lock release button.
The mode lamp <CAMERA>/<PB> goes off.
Lock release button
POWER/MODE switch
Mode lamp
Switching to AVCHD mode/DV mode
1
Turn the camera’s POWER/MODE switch <ON>. (Page 30)
2
Press the <MENU> button.
3
Set [AVCHD] or [DV] from the [HD/SD MODE] items in the setup menu
[RECORDING SETUP] screen.
4
When the [TURN POWER OFF] message is displayed, turn the power
OFF and then ON again.
When the power is turned on again, the mode changes.
•
For instructions on how to turn the camera ON/OFF, refer to page 30.
•
When you switch to AVCHD mode, <HD> indicator will light up in blue.
•
When you switch to DV mode, <HD> indicator will turn off.
<HD> indicator