Panasonic AJ-HPX3000 Guia Do Utilizador
153
Maintenance and Inspections : Warning System
M
a
in
te
nan
ce an
d Insp
ecti
on
s
s
Warning and Error Display for Thumbnail Operation and USB HOST MODE
Item
Message
Description
Measure
Thumbnails
CANNOT ACCESS!
Data cannot be accessed because it is
corrupted or for other reasons.
corrupted or for other reasons.
Restore media and clips to normal state before
access.
access.
WRITE
PROTECTED!
PROTECTED!
The P2 or SD card is write protected.
Insert write-enabled media.
CARD FULL!
The P2 or SD card is full.
Insert media with sufficient capacity.
NO CARD!
No P2 or SD card is inserted.
Insert compatible media.
NO FILE!
The designated file is not found.
Check the file.
CANNOT COPY!
Images cannot be copied.
Check the conditions for copying.
CANNOT DELETE !
Contents version mismatch prevents
deletion.
deletion.
Match devices and contents version.
UNKNOWN
CONTENTS
FORMAT!
CONTENTS
FORMAT!
Warning displayed to indicate contents
version mismatch.
version mismatch.
Match devices and contents version.
CANNOT FORMAT!
P2 card problem prevents formatting.
Check P2 card.
CANNOT REPAIR!
Data cannot be repaired since content that
cannot be repaired is selected.
cannot be repaired is selected.
Check selected content.
CANNOT RE-
CONNECT!
CONNECT!
A clip that does not span multiple cannot be
reconnected.
reconnected.
Check selected content.
INVALID VALUE!
Entered data was invalid.
Enter data in a valid range.
UNKNOWN DATA!
The metadata character code is invalid.
Use UTF-8 for the metadata character code. Use
the viewer to enter correct characters.
the viewer to enter correct characters.
CANNOT REPAIR IN
SELECTION!
SELECTION!
Some of the selected clip could not be
repaired.
repaired.
NO SD CARD!
No SD card is inserted.
Insert an SD card.
NO COPY TO SAME
CARD!
CARD!
A clip cannot be copied to the card storing
the original clip.
the original clip.
Copy the selected clip to a card that does not
contain the original clip.
contain the original clip.
SAME CLIP IS
SELECTED!
SELECTED!
Images cannot be copied since the clip has
already been copied from the original clip.
already been copied from the original clip.
Confirm the selected clip and release either the
source clip or the destination clip and then execute
the copy operation.
source clip or the destination clip and then execute
the copy operation.
USER CLIP NAME
MODIFIED!
MODIFIED!
Characters in the clip name had to be
deleted in adding the counter value.
deleted in adding the counter value.
The user clip name plus the counter value can only
contain up to 100 bytes. Characters in the clip
name are automatically deleted when the total
exceeds 100 bytes.
contain up to 100 bytes. Characters in the clip
name are automatically deleted when the total
exceeds 100 bytes.
TOO MANY CLIPS!
Too many clips are selected.
Reduce the number of selected clips.
LACK OF REC
CAPACITY!
CAPACITY!
There is not enough recording capacity left
on the card.
on the card.
Insert a card with sufficient recording capacity.
UNMATCHED RE
FORMAT!
FORMAT!
The format of the clip which is playing back
and the selected format of this unit are not
matched.
and the selected format of this unit are not
matched.
Set the format in the SYSTEM MOD
E item. The
SYSTEM MODE is selected from the SYSTEM
SETTING page.
SETTING page.
MISSING CLIP!
A shot mark will be added to the clips
recorded on multiple P2 cards when all P2
cards are not inserted yet.
recorded on multiple P2 cards when all P2
cards are not inserted yet.
Insert all P2 cards with recorded clips, and confirm
that the
that the
incomplete clip indicators disappear, and
then add shot marks.
Soft
keyboard
keyboard
CANNOT CHANGE!
[PERSON] will be entered while the text
memo is not available.
memo is not available.
Enter [TEXT] before entering [PERSON].
CANNOT SET!
INVALID VALUE!
INVALID VALUE!
The entered value is incorrect.
Change the value.
AJ-HPX3000G(VQT1D27)E.book 153 ページ 2007年9月3日 月曜日 午後2時34分