Panasonic AJ-HPX3000 Guia Do Utilizador

154

Maintenance and Inspections : Warning System

HDD

（

USB HOST 

MODE

）

HDD CAPACITY 
FULL!

Not enough space left on the hard disk. 

There is not enough space on the connected hard 
disk. Use a new hard disk or formatted hard disk. 

TOO MANY 
PARTITIONS!

There are too many partitions. 

Hard disks can handle up to 23 partitions. Use a 
new hard disk or formatted hard disk. 

HDD 
DISCONNECTED!

The unit is not connected to a hard disk. 

Reconnect the USB cable. If the hard disk does 
not operate normally, turn it off and turn it back on 
again. 

CANNOT FORMAT!

The hard disk cannot be initialized. 

Connect another hard disk drive. 

TOO MANY 
TARGETS!

Multiple devices are connected. 

Disconnect devices, turn off the unit and turn it 
back on again. 

UNKNOWN DEVICE 
CONNECTED!

The connected DVD drive is not compatible. 

Disconnect devices, turn off the unit and turn it 
back on again. 

CANNOT ACCESS 
TARGET!

An error occurred during hard disk access. 

Check hard disk status and connection. 

CANNOT 
RECOGNIZE
HDD!

The destination target cannot be properly 
recognized. 

Reboot the hard disk or connect a different hard 
disk. 

CANNOT ACCESS 
CARD!

An error occurred during P2 card access. 

Check P2 card. 

MISMATCH 
COMPONENT!

Copying cannot be made because the 
destination card is in the wrong format. 

Use a P2 card with appropriate capacity.

P2 CARD IS 
UNFORMATTED!

The P2 card is not formatted. 

Use a formatted P2 card. 

CARD IS EMPTY! 
CANNOT COPY!

The P2 selected for copying is empty. 

Copying is not performed since the card is empty. 

VERIFICATION 
FAILED!

The compare check after copying failed. 

Copy the data again. 

PLEASE FORMAT 
P2 CARD!

This warning indicates that data could not be 
imported from a hard disk to a P2 card 
because the P2 card contained recorded 
data. 

You cannot copy to a P2 card that contains data. 
Format the card on a P2 device and copy again. 

AJ-HPX3000G(VQT1D27)E.book  154 ページ  ２００７年９月３日　月曜日　午後２時３４分