3com 5500-ei pwr Instrução De Instalação

 

1-4 

Create a smart link group 

Add member ports to the smart link group 

Configuring a Smart Link 
Device 

Enable the function of sending flush messages in the 
specified control VLAN 

Required 

Enable the function of processing flush messages 
received from the specified control VLAN 

Required 

 

A Smart Link device refers to a device on which Smart Link is enabled and a smart link group is 

configured, and that sends flush messages from the specified control VLAN. A member port of a smart 

link group can be either an Ethernet port or a manually-configured or static LACP aggregation group. 

You can configure a port or a link aggregation group as a member of a smart link group. 

Follow these steps to configure Smart Link (with ports as the members of the smart link group): 

Enter system view 

— 

Create a smart link group and 
enter smart link group view 

smart-link group group-id 

Required 

Enable the function of sending 
flush messages in the 
specified control VLAN 

flush enable control-vlan 
vlan-id  

Required 

By default, no control VLAN for 
sending flush messages is specified.

smart link 
group view 

port interface-type 
interface-number { master | 
slave } 

interface interface-type 
interface-number 

Configure a 
port as a 
smart link 
group 
member 

Ethernet port 
view 

port smart-link group 
group-id { master | slave } 

Required 

Use either approach 

 

Follow these steps to configure Smart Link (with link aggregation groups are the members of the smart 

link group): 

Enter system view 

— 

Create a smart link group and 
enter smart link group view 

smart-link group group-id 

Required 

Configure a link aggregation 
group as a member of the 
smart link group 

link-aggregation group 
group-id { master | slave } 

Optional 

Enable the function of sending 
flush messages in the 
specified control VLAN 

flush enable control-vlan 
vlan-id  

Optional 

By default, no control VLAN for 
sending flush messages is specified.