3com 5500-ei pwr Instrução De Instalação
1-1
1
Configuration File Management
When configuring configuration file management, go to these sections for information you are
interested in:
z
z
Introduction to Configuration File
A configuration file records and stores user configurations performed to a switch. It also enables users
to check switch configurations easily.
Types of configuration
The configuration of a switch falls into two types:
z
Saved configuration, a configuration file used for initialization. If this file does not exist, the switch
starts up without loading any configuration file.
z
Current configuration, which refers to the user’s configuration during the operation of a switch. This
configuration is stored in Dynamic Random-Access Memory (DRAM). It is removed when
rebooting.
Format of configuration file
Configuration files are saved as text files for ease of reading. They:
z
Save configuration in the form of commands.
z
Save only non-default configuration settings.
z
The commands are grouped into sections by command view. The commands that are of the same
command view are grouped into one section. Sections are separated by comment lines. (A line is a
comment line if it starts with the character #.)
z
The sections are listed in this order: system configuration section, logical interface configuration
section, physical port configuration section, routing protocol configuration section, user interface
configuration, and so on.
z
End with a return.
The operating interface provided by the configuration file management function is user-friendly. With it,
you can easily manage your configuration files.
Main/backup attribute of the configuration file
Main and backup indicate the main and backup attribute of the configuration file respectively. A main
configuration file and a backup configuration file can coexist on the switch. As such, when the main
configuration file is missing or damaged, the backup file can be used instead. This increases the safety
and reliability of the file system compared with the switch that only support one configuration file. You
can configure a file to have both main and backup attribute, but only one file of either main or backup
attribute is allowed on a switch.
The following three situations are concerned with the main/backup attributes: